1 composite transistors UN603 silicon pnp epitaxial planer transistor for dcCdc converter n features l two elements incorporated into one package. l reduction of the mounting area and assembly cost by one half. l automatic mounting possible through 12mm wide emboss-tap- ing supply. n basic part number of element l 2sa1674 2 elements n absolute maximum ratings (ta=25?c) unit: mm marking symbol: 6c internal connection parameter symbol ratings unit collector to base voltage v cbo C80 v collector to emitter voltage v ceo C80 v emitter to base voltage v ebo C5 v collector current i c C1 a peak collector current i cp C1.5 a total power dissipation p t *1 1w junction temperature t j 150 ?c storage temperature t stg C55 to +150 ?c mini-power type package (6Cpin) b c e e c b 2.5 0.2 1.5 0.2 6-0.4 0.1 4-1.5 0.1 0.25 0.1 0 to 0.1 0.05 0.05 4.5 0.2 (f 0.8) (0.7) 0.6 0.1 (0.4) 1.8 0.1 (1.05) 16 25 34 4.5 0.2 n electrical characteristics (ta=25?c) parameter symbol conditions min typ max unit collector to base voltage v cbo i c = C10 m a, i e = 0 C80 v collector to emitter voltage v ceo i c = C1ma, i b = 0 C80 v emitter to base voltage v ebo i e = C10 m a, i c = 0 C5 v collector cutoff current i cbo v cb = C40v, i e = 0 C 0.1 m a forward current transfer ratio h fe1 v ce = C2v, i c = C100ma* 120 340 h fe2 v ce = C2v, i c = C500ma* 60 collector to emitter saturation voltage v ce(sat) i c = C500ma, i b = C50ma* C 0.2 C 0.3 v base to emitter saturation voltage v be(sat) i c = C500ma, i b = C50ma* C 0.85 C1.2 v transition frequency f t v cb = C10v, i e = 50ma, f = 200mhz 120 mhz collector output capacitance c ob v cb = C10v, i e = 0, f = 1mhz 15 30 pf * pulse test *1 printed circuit board: copper foil area of 4cm 2 or more and thickness of 1.7mm for the collector portion. maintenance/ discontinued please visit following url about latest information. http://panasonic.co.jp/semicon/e-index.html
request for your special attention and precautions in using the technical information and semiconductors described in this book (1) if any of the products or technical information described in this book is to be exported or provided to non-residents, the laws and regulations of the exporting country, especially, those with regard to security export control, must be observed. (2) the technical information described in this book is intended only to show the main characteristics and application circuit examples of the products, and no license is granted under any intellectual property right or other right owned by our company or any other company. therefore, no responsibility is assumed by our company as to the infringement upon any such right owned by any other company which may arise as a result of the use of technical information described in this book. (3) the products described in this book are intended to be used for standard applications or general electronic equipment (such as office equipment, communications equipment, measuring instruments and household appliances). consult our sales staff in advance for information on the following applications: ? special applications (such as for airplanes, aerospace, automobiles, traffic control equipment, combustion equipment, life support systems and safety devices) in which exceptional quality and reliability are required, or if the failure or malfunction of the prod- ucts may directly jeopardize life or harm the human body. ? any applications other than the standard applications intended. (4) the products and product specifications described in this book are subject to change without notice for modification and/or im- provement. at the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date product standards in advance to make sure that the latest specifications satisfy your requirements. (5) when designing your equipment, comply with the range of absolute maximum rating and the guaranteed operating conditions (operating power supply voltage and operating environment etc.). especially, please be careful not to exceed the range of absolute maximum rating on the transient state, such as power-on, power-off and mode-switching. otherwise, we will not be liable for any defect which may arise later in your equipment. even when the products are used within the guaranteed values, take into the consideration of incidence of break down and failure mode, possible to occur to semiconductor products. measures on the systems such as redundant design, arresting the spread of fire or preventing glitch are recommended in order to prevent physical injury, fire, social damages, for example, by using the products. (6) comply with the instructions for use in order to prevent breakdown and characteristics change due to external factors (esd, eos, thermal stress and mechanical stress) at the time of handling, mounting or at customer's process. when using products for which damp-proof packing is required, satisfy the conditions, such as shelf life and the elapsed time since first opening the packages. (7) this book may be not reprinted or reproduced whether wholly or partially, without the prior written permission of matsushita electric industrial co., ltd.
|
